Stainless Steel Glass Frame Profiles
Stainless Steel Tile Internal Corner Glass Profile
Price on request
Stainless steel glass frame profiles are considered for creating a metal edge in details where glass and covering surfaces meet. The Tile Internal Corner Glass Profile in this group organises the relationship between the glass edge and the tile with its channel section.
Category guide
Choosing a profile for a tile and glass junction
When choosing a stainless steel glass profile, the channel shape, the actual thickness of the glass and the fixing method are assessed together. The product in this category is a special section intended for a tile internal corner junction. It should not be interpreted as general facade joinery or as a common load-bearing system for every type of glass.
Channel and junction detail
-
Channel for the glass edge
The stainless steel glass channel profile defines the part in which the glass edge is positioned. The clear channel opening and the intermediate material to be used are checked for the selected application.
-
Internal corner relationship with tile
The tile internal corner glass profile creates a metal transition line at the point where the covering and the glass meet.
-
Fixing together with the system
The size and weight of the glass and the fixing conditions accompany the choice of profile. Sealing and safety requirements are resolved through the whole fixing detail.
Four checks when choosing
-
Glass thickness
Measure the net thickness of the glass; assess it together with the channel and the gasket or filler requirement.
-
Covering level
Match the finished height of the tile and the bonding layer to the technical section.
-
Fixing condition
Verify that the fixing substrate and the selected method are suitable for the glass dimensions.
-
Wet area detail
In junctions exposed to water, plan the waterproofing and sealing solution separately.
Areas of use and suitability
The glass-to-tile junction profile is considered for interior details where the glass edge meets the tile covering. If it is to be used in a shower area or a similar application, glass safety and the fixing system must be verified for the specific project.
Planning before installation
Glass and tile samples are compared against the profile section. The clear opening, the intermediate materials and the finished level are determined. The installation sequence, fixing and filling method are applied according to the relevant system instructions. No load-bearing or sealing capacity is derived from the channel shape of the profile.
Determine the section that suits your application
Determine the function of the joint; compare the covering and the profile section against the finished surface dimensions.